Water Pump Seals manufacturers explains 5 most common problems in Hydraulic Pumps

Water Pump Seals Manufacturers Explains 5 Most Common Problems in Hydraulic Pumps

Does your artesian well not draw water, or does little water come out? The problem may be with the Water Pump Seals manufacturers. Find out what are the most common pump types for artesian wells, and their most frequent defects

By technical definition, an artesian well is one that spurts water naturally, without the need for a pump. However, gushing wells are very rare.

Most wells – including deep wells, over 100 meters, commonly called artesian – need the help of a pumping set to bring the water to the surface.

Therefore, it is important to know the ideal type of Water Pump Seals manufacturers, as well as the most common problems that this set can present.

How to choose Water Pump Seals manufacturers?

To choose the ideal pump (also called a motor pump), you need to know the diameter, depth and water flow of the artesian well. Other interesting data are the dynamic and static level of the well.

This information must be provided by the drilling company.

In many cases, drilling contracts involve installing the pumping set, that is, you already get the well running, with the right pump for it.

If this is not your case, however, be sure to obtain all the necessary data, as well as the characteristics of the well, to purchase the right equipment.

What is the main pump type for artesian wells?

The type of pump most used in deep artesian wells is the submerged model. It is better to ask professional Water Pump Seals manufacturers before installing pump.

The submerged pump, as its name implies, is underwater all the time. It needs a certain level of water to function properly, so it is interesting to have a float to control whether that level is too high or too low.

There are models that pump clean water and models capable of pumping water with solid materials, such as sand and earth.

How does the submerged pump work?

The main function of this motor pump is to press the water upwards. To achieve this goal, most models on the market have a submersible electric pumping system (ESP), a kind of engine.

Submerged pumps can have various sizes (both in diameter and in length) and be composed of different materials, such as iron and stainless steel. Remember that stainless options are always superior, as they are not at risk of rusting.

This type of pump meets different needs, from residential supply to agricultural, food, mining, construction and sanitation purposes.

Power and voltage: Water Pump Seals manufacturers

The ideal power of the pump will depend on the pressure and flow of each well and Water Pump Seals manufacturers.

The supply voltage must be compatible with the voltage of the location where the pump will be started. In the case of submerged, there is no bivolt version.

For residential use, the voltage can be 110 or 220 volts, but 220 volts is indicated. For industrial uses, the voltage is usually 220, 380 or 440 volts three-phase.

What are the most common problems or defects in submersible pumps?

Does your artesian well not draw water, or does little water come out? The problem may be with the pump.

The most common defects that artesian well pumps have are:

• do not extract water;
• supply water at a lower flow;
• overload the engine;

The probable causes as described by Water Pump Seals manufacturers are many, such as:

• not having enough water for the submerged pump to work properly (low level);
• air entering the pipeline;
• insufficient or above normal engine speed;
• pump turning in reverse.

Some of the possible solutions Water Pump Seals manufacturers provide are:

• adjust the motor voltage;
• correct the connection;
• seal connections;
• disassemble and overhaul parts;
• unclog or replace the rotor;
• clean the pump;
• replace the pump.

Check below the most common defects in Water Pumps , their potential causes and solutions.

The pump does not turn
Probable Causes
a) The electrical installation of the pump is incorrect.
b) The pump is locked.
Solution
a) Connect according to the pump connection plate.
b) Unlock the pump using pliers, rotating the exposed shaft at the rear of the pump.

The pump rotates with high energy consumption and heats up quickly

Probable causes
a) The electrical installation of the pump is incorrect.
b) The direction of rotation is opposite to that indicated.
c) Rotor in friction with the cover.
d) Gasket too tight.
e) Insufficient voltage in the pump supply.

Solution

a) Connect according to the pump connection plate. Visit your nearest

Water Pump Seals manufacturers

b) Observe the direction of rotation as indicated by the indicative arrow on the pump cover and invert the direction of rotation.
c) Forward to technical assistance.
d) Loosen the nut that tightens the gasket.
e) The electrician must make a correction so that the pump receives the correct voltage.
The pump rotates, but pumps little

Probable Causes

a) Air may be entering the inlet (suction) tube.
b) The foot valve is half blocked.
c) The height of the settlement liquid is higher than indicated.

Solution

a) Seal all connections well.
b) Can be cleaned manually.
c) The pump used is not the correct one.

The pump spins, but does not pump water

Probable Causes
a) Existence of air in the inlet (suction) piping or in the pump body.
b) Air may be entering the inlet (suction) tube.
c) The foot valve is locked or blocked. For this, visit Water Pump Seals Manufacturers Company.
d) The height of the suction or discharge liquid is higher than indicated.
e) The injector may be blocked (which can occur in the case of injection or high pressure pumps).
Solution
a) Refill the pump with the liquid to be pumped through the plug until all the air leaves the pipeline.
b) Seal all connections well.
c) Can be manually unlocked and cleaned.
d) The pump used is not the correct one.
e) Refer to technical assistance.

The pump pumps at the beginning, but when restarting it does not pump anymore

Probable Causes
a) Air may be entering the inlet (suction) tube.
b) The foot valve is holding liquid.
Solution
a) Seal all connections well.
b) Repair the valve or replace it.

Conclusion: Water Pump Seals manufacturers

Although pool pumps are built to withstand adverse factors – such  as exposure to the sun, contact with high humidity and many hours of operation in the same week  –  problems with this equipment end up being inevitable. In these cases, the most common situations are defects that compromise your basic pool pump functions, such as filtration and water circulation.

In this situation you need team of reliable water Pump Seals manufacturers. Although you are unable to perform some types of maintenance, it is important to identify the nature of the defect. With that in mind, we organized today’s post with the 4 most frequent problems with pool pumps. Check out!