different types of oil seals Watco Danish Oil vs. Polyurethane for Wood Finishing

by:DSH     2019-06-09
different types of oil seals Watco Danish Oil vs. Polyurethane for Wood Finishing
Watco Danish oil is a wood finish product, also known as an oil/varnish mixture, because it contains both permeability and varnish.Polyurethane is also a wood finish, but it is made of synthetic resin and has different benefits for your wood furniture and flooring compared to Danish oil.Danish oil is used to complete and protect the surface of the wood from moisture.It is made by mixing a small amount of varnish into a larger amount of curing or permeability (such as Tung oil or linen oil.Polyurethane is made of different types of oil mixed alcohol and synthetic resin.Then heat until the ingredients are mixed.Danish oil is coated with cloth on the wood and wiped off.It usually stays for 10 to 15 minutes to allow oil to penetrate into the wood before removing excess wood.Danish oil dries quickly, but to ensure that it dries properly, it should be allowed to dry overnight.Polyurethane is painted with a brush, which can be difficult to use.If the application is too thick or too fast, running and dripping may occur at the end point.Polyurethane takes up to 72 hours before it is fully cured, and due to the long drying time, it tends to pick up some dust and hair, which may spoil the final result.Danish oil penetrates the wood to enhance the appearance of the wood surface.Polyurethane provides a thick solid coating on the surface of the wood, but does not significantly change the appearance.Polyurethane glossy, halfGlossy and satin finish to give you some choice in terms of final results-But polyurethane does not change the color of the wood.On the other hand, Danish oil is usually dried to a smooth surface, with a variety of colors to choose from.Polyurethane provides a long-termLong-lasting coating, resistant to moisture and wear.Most polyurethane products can only be removed by using a chemical stripping device and heavy-duty sanding, which makes it a solid surface that does not require frequent reuse.When Danish oil penetrates into wood grain, it dries into a thin and soft film that resists moisture but does not scratch.Danish oil may need to be re-applied when used on the floor or furniture, as protective but soft finishes wear faster than polyurethane.Danish oil and polyurethane are two very different wood finishes, making them ideal for different applications.The soft surface of Danish oil makes it unsuitable for items that are abused or often spilled, such as floors, tables and chairs.The polyurethane coating is better and will not fade or scratch due to heavy use.However, only items with soft gloss or rustic decoration, such as photo frames, decorative tables, and accessories such as clocks or jewelry boxes, do not need this tough coating.If you are tired of the color or appearance of the wood, Danish oil can make it easy for you to re-process.
Custom message

Chat Online 编辑模式下无法使用
Chat Online inputting...