Home  >  Quality Products Exporter  >  PTFE oil seals Supplier  > 

energized teflon gasket manufacturer for engineering

energized teflon gasket manufacturer for engineering

energized teflon gasket manufacturer for engineering
  • energized teflon gasket manufacturer for engineering
  • energized teflon gasket manufacturer for engineering
  • energized teflon gasket manufacturer for engineering
  • energized teflon gasket manufacturer for engineering
  • energized teflon gasket manufacturer for engineering

energized teflon gasket manufacturer for engineering

Type
J type
Delivery Time
3-7 days
Quality
High-quality
Service
Standard product/Customized product
Brand
DSH
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Company Advantages
1. Application shows that the reformed teflon oil seals has rational structure and teflon gasket performance. Its material makes it extremely tough, yet still flexible enough to be a seal
2. With the greater popularity, the application potential of the product is tremendous. It can be customized to operate in a broader range of applications
3. teflon oil seals is featured with teflon gasket , which is of great realistic meaning and economic meaning. It can maintain good medium resistance even in the case of high temperature


For this configuration, anti-rotation is achieved by using an O-Ring to create a frictional interface between the seal and bore. Although a metal cased lip seal has higher pressure and speed rating, an O-Ring OD lip seal is a good choice economically when application parameters permit. Lower use applications such as food processing equipment, pharmaceutical equipment and environmental shaft exclude can benefit from this design. For friction sensitive applications, a lip seal with O-Ring OD should be considered. In service, a lip seal will experience a short period of break-in, after which time the seal element will reach a steady state condition. This steady condition allows very low, very consistent friction equating to low power consumption and heat generation.


Common Materials Used in this Product


  • The most popular fillers for products are graphite, fiberglass/molybdenum disulfide, carbon fiber and mineral.


Graphite Filled


  • Since graphite is often used as a lubricant, it does not significantly increase the coefficient of friction of PTFE when used as a filler. The low friction allows the compound to be used when both shaft speed and pressure are high. Graphite also is chemically inert which enables its use in corrosive medias.


Proprietary Low Wear PTFE


  • This proprietary filled PTFE offers low wear and friction properties, used in general applications where long life is required. Not recommended for applications with abrasive media.


Molybdenum Disulfide and Fiberglass Filled


  • Molybdenum disulfide increases the hardness of the seal surface while decreasing friction. It is normally used in small proportions combined with other fillers such as glass. MoS2 is also inert towards most chemicals.


Carbon Fiber Filled


  • Carbon fiber lowers creep, increases flex and compressive modulus and raises hardness. Coefficient of thermal expansion is lowered and thermal conductivity is higher for compounds of carbon fiber filled PTFE. Ideal for automotive applications in shock absorbers and water pumps.


◆◆ PTFE+NBR/FKM


Material descriptionFilled PTFE (such as MoS2/Glass fiber, Ekonol and so on), or Virgin PTFE is available, O ring maerial depends on the specific application.
Available ColorWhite, black,yellow, gold etc.
Material StrengthVirgin PTFE can meet the requirement of food grade approval. Type J oil seal has single lip, apply to low pressure till 1.5 bar. We can offer you different kinds of material which apply to your specific application. Customized sealing solution is available.
Temperature-20~+100℃
Speed≤30 m/s
Pressure≤1.5 bar
Mediumoil, grease.
Applied deviceLow pressure resistant, mainly apply in bearing sealing.


DSH-Find Teflon Oil Seal J Type - Low Pressure Resistant Ptfe Oil
DSH-Find Teflon Oil Seal J Type - Low Pressure Resistant Ptfe Oil-1
DSH-Find Teflon Oil Seal J Type - Low Pressure Resistant Ptfe Oil-2
DSH-Find Teflon Oil Seal J Type - Low Pressure Resistant Ptfe Oil-3



Company Features
1. Guangdong DSH Seals Technology Co., Ltd ​​is a teflon oil seals manufacturer with modern production capacity.
2. There is a skilled and experienced technical group in Guangdong DSH Seals Technology Co., Ltd to provide technical support for customers.
3. Guangdong DSH Seals Technology Co., Ltd is committed to providing professional services and reliable oil seal ptfe. Ask online!
Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Chat Online inputting...